Free disk imaging and cloning with Clonezilla Live

Use Clonezilla Live to save a disk image or clone to a new drive. Learn how to identify the target disk, avoid overwrites, and verify the copy.

Use Clonezilla Live to save a disk image for recovery or copy an old drive onto a replacement. An image is a backup stored as files. A clone writes directly to another disk and overwrites what was there. Choose an image if you want to keep a recovery copy or a clone if you’re moving to a new drive.

Prepare the disks before booting

Back up irreplaceable files separately. Note the model, capacity, and serial number of each drive and disconnect any storage you don’t need. Drive letters and disk order can differ when you boot from USB. If the drive is failing or keeps disconnecting, stop ordinary cloning attempts and decide whether professional recovery is warranted.

Choose image backup or direct clone

  • Save an image. Boot Clonezilla Live and choose device-image. Put the backup on a separate drive with sufficient space. Follow the official save disk image walkthrough and enable the image check when offered.
  • Clone to a replacement drive. Choose device-device and confirm the source and destination by model and capacity before proceeding. For a first clone, use a destination at least as large as the source. The disk-to-disk guide shows the prompts.

Verify the result before retiring the old drive

For a clone, shut down and disconnect the original before trying to boot the replacement. Open a few important files and check that recovery keys are available if encryption prompts for them. For an image, keep the boot USB and image together and, if practical, test restoration to a spare disk. An image check verifies the backup file, while a test restore checks that you can use it.

Last reviewed 12 November 2026. This article draws on the linked documentation.